Filter
Top Products
Receiver/Controller Activation
NOTICE: This product will NOT work correctly
unless you follow the procedure below.
Before you can start watching satellite TV via
TracVision, the receiver/controller must be activated.
Once your antenna system is fully installed, follow
the steps below to activate the receiver/controller.
1. Ensure your antenna has a clear view of the
southern sky then turn on your TracVision
system and tune to the preview channel (100).
2. Locate your red Activation Card.
3. Call KVH’s Activation Department at:
1-866-551-8004
(24 hours a day, 7 days a week)
4. After activation is complete, KVH’s Activation
Department will provide an access card number,
receiver ID number, DIRECTV serial number, and
model number. Enter these numbers in the
associated boxes on the red Activation Card.
Technical Support
The TracVision system has been designed with
durability and low maintenance in mind. If you
experience an operating problem or otherwise require
technical assistance, please call your local authorized
TracVision dealer/installer. If an authorized
dealer/installer is not located nearby, contact KVH
Technical Support directly:
Phone: 1-401-847-3327
E-mail: techs@kvh.com
54-0376
v
Technical Support
Please have the antenna and receiver/
controller serial numbers handy when
calling to activate. The serial numbers are
noted on the red Activation Card.