Filter
Top Products
1.3.1-Insertion of Batteries in the Remote Control
Insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the
batteries with the (+)and (-) symbols inside the battery compartment. Re-attach the battery cover.
•Only use the specified AAA batteries.
•Do not mix new and old batteries. This may result in cracking or
leakage that may pose a fire risk or lead to personal injury.
•Inserting the batteries incorrectly may also result in cracking or
leakage that may pose a fire risk or lead to personal injury.
•Dispose of the batteries in accordance with local laws and
regulations.
•Keep the batteries away from children and pets.
Precaution Tips for inserting the batteries
1.3.2-Remote Control Range
•Point the remote control at the remote control sensor to transmit the commands.
•Do not place any obstacles between the remote control and the receiver window.
•The effective range of the remote control is approximately 32 feet(10 meters) from the front of
the receiver window, 30° to the left and right, 20° up and down.
1.3.3-Precautions for the ASTAR Remote Control
•The remote control should be kept dry and away from heat sources. Avoid humidity.
• If the display responds erratically to the remote control or does not respond at all, check the batteries. If
the batteries are low or exhausted, replace them with fresh batteries.
• When not using the remote control for a long period of time, remove the batteries.
• Do not take apart the batteries, heat them, or throw them into a fire.
• Do not subject the remote control to undue physical stress, such as striking or dropping it.
• Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
www.astarelectronics.com
12