Filter
Top Products
Your TV features PIP mode, so you can watch two pictures at the same time. When PIP is turned on, by
pressing the PIP button on your Remote Control, you can display two picture at one time. One picture is
displayed as the full screen (main screen) and the other picture is displayed in a small window(sub
screen). The sub-screen can be set to small, medium or large.
See the diagram below for detailed information of the PIP sources
3.5.11-Picture-in-Picture(PIP)/Picture-by-Picture(POP) Mode
DTV
ATV
AV
S-Video
YPbPr1
YPbPr2
HDMI
VGA
MAIN DTV ATV AV S-Video
YPbPr1
HDMI
VGA
PIP Channel
The PIP channel is independent of the main TV channel. To change the PIP channel, press the button to
select sub picture and press the CH+/- button on the remote control.
Swapping PIP/POP Video
You can swap the program that is in the main picture with the program in the PIP sub-picture. To swap the main
picture with the PIP sub-picture program, press SWAP on the remote control. If you press SWAP again, it will
return the program to the main picture. This works the same if you are in the Picture by Picture(POP) mode.
Swapping PIP/POP Audio
You can also swap the audio between main picture and PIP sub-picture by pressing the button on your
remote control. For example, if you are listening to the audio for the Main Screen and want to hear the audio
from the Sub Screen you press the button; press the button to switch back. This works the same if you
are in the Picture by Picture (POP)mode.
3.5.12-Adjusting Basic PIP/POP Settings
YPbPr2
PIP
www.astarelectronics.com
44