Filter
Top Products
3.2 - Watching a TV Program
Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are
secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector.
1.Press the power button on the remote control or on the front of your LCD TV. The status LED on the front will
turn solid green.
2.There are 4 options for selecting your programming:
a. If you are using Air or Cable connected through the DTV input, you can select DTV using the INPUT button
on the front of your LCD TV.
b. If you are using a cable set -top box, satellite dish, or off-air antenna connected through the TV(Cable/Air)
input, you can select TV using the INPUT button on the front of your LCD TV.
c. If you are watching broadcasts through a cable set-top box or satellite dish connected by HDMI, select
HDMI using the INPUT button on the front of your TV.
d. If you are watching a cable set-top box or satellite dish connected through the component inputs (YPbPr),
select YPbPr1 or YPbPr2 using the INPUT button on the front of your LCD TV.
Note: You should be able to see a picture. If you do not, make sure that all connections are secure
and you have selected the correct video input source.
3.Press the CH+/- buttons on the remote control or the CH+/- buttons on the front of your LCD TV to change
the channel. Note: The CH+/- buttons will not work if you are watching a program using HDMI, YPbPr1,
YPbPr2, AV, S-Video and VGA inputs.
3.3 - Adjusting Basic LCD TV Settings
Volume
To increase the volume, press and hold the VOL+ button on the front panel or remote control until the
desired level is reached.
To decrease the volume, press and hold the VOL- button on the front panel or remote control until the
desired level is reached.
TV Channels
To step up through the available TV channels, press the CH+ button on the front panel or remote control
once for the next channel or hold it depressed until the desired channel is reached.
To step down through the available TV channels, press the CH- button on the front panel or remote control
once for the previous channel or hold it depressed until the desired channel is reached.
Note: CH+/- will only operate on TV and DTV modes.
www.astarelectronics.com
28