Astar electronic LTV-27HBG Flat Panel Television User Manual


  Open as PDF
of 52
 
Available for the following input sources-AV,S-Video,
YPbPr1, YPbPr2, HDMI, DTV or ATV.
Contrast-Adjusts the level of white between the lightest and
darkest portions of an image, If the contrast is too low, the picture
appears dark and lacks detail. If The contrast is too high, the
picture appears faded and lacks shadow and depth.
Brightness-Adjusts the black levels of the picture, Users may
need to readjust the brightness after the TV warms up.
Saturation- Adjusts the levels of white and color in the picture.
Highly saturated colors then to be deep and strong while
unsaturated colors are weaker and lighter.
Hue-Adjusts to make the flesh tones more natural.
Sharpness-Adjusts the clarity of the picture. If the sharpness is set
too high, hard edges in the picture appear to have a ghost image.
Phase- Adjust the phase by pressing , this feature is only used
for YPbPr input sources.
Color Temperature-Option include user, cool, middle or warm,
if you select the item of "User" and press "Enter" button, a status
bar below comes up for you to adjust the color temperature to your
desirable value.
Backlight - Adjust brightness of lamps.
Advance Picture Adjust- Press the enter button, "Advance
Picture Adjust" window appears.
3.5.2-Video
Contrast
Brightness
Saturation
Hue
Sharpness
Phase
Color Temperature
Back Light
Advance Picture Adjust
80
55
60
0
4
5
User
Bright
Press Enter
Video
Select
Exit
Enter
Available for the following input sources-AV,S-Video,
YPbPr1, YPbPr2, HDMI, DTV or ATV.
Contrast-Adjusts the level of white between the lightest and
darkest portions of an image, If the contrast is too low, the picture
appears dark and lacks detail. If The contrast is too high, the
picture appears faded and lacks shadow and depth.
Brightness-Adjusts the black levels of the picture, Users may
need to readjust the brightness after the TV warms up.
Saturation- Adjusts the levels of white and color in the picture.
Highly saturated colors then to be deep and strong while
unsaturated colors are weaker and lighter.
Hue-Adjusts to make the flesh tones more natural.
Sharpness-Adjusts the clarity of the picture. If the sharpness is set
too high, hard edges in the picture appear to have a ghost image.
Phase- Adjust the phase by pressing , this feature is only used
for YPbPr input sources.
Color Temperature-Option include user, cool, middle or warm,
if you select the item of "User" and press "Enter" button, a status
bar below comes up for you to adjust the color temperature to your
desirable value.
Backlight - Adjust brightness of lamps.
Advance Picture Adjust- Press the enter button, "Advance
Picture Adjust" window appears.
3.5.2-Video
Contrast
Brightness
Saturation
Hue
Sharpness
Phase
Color Temperature
Back Light
Advance Picture Adjust
80
55
60
0
4
5
User
Bright
Press Enter
Video
Select
Exit
Enter
DNR
CT1
Flash Tone
Adaptive Luma Control
Low
Middle
Off
On
Video
Select
Exit
Enter
Available for the following input sources-AV,S-Video,
YPbPr1, YPbPr2, HDMI, DTV or ATV.
Contrast-Adjusts the level of white between the lightest and
darkest portions of an image, If the contrast is too low, the picture
appears dark and lacks detail. If The contrast is too high, the
picture appears faded and lacks shadow and depth.
Brightness-Adjusts the black levels of the picture, Users may
need to readjust the brightness after the TV warms up.
Saturation- Adjusts the levels of white and color in the picture.
Highly saturated colors then to be deep and strong while
unsaturated colors are weaker and lighter.
Hue-Adjusts to make the flesh tones more natural.
Sharpness-Adjusts the clarity of the picture. If the sharpness is set
too high, hard edges in the picture appear to have a ghost image.
Phase- Adjust the phase by pressing , this feature is only used
for YPbPr input sources.
Color Temperature-Option include user, cool, middle or warm,
if you select the item of "User" and press "Enter" button, a status
bar below comes up for you to adjust the color temperature to your
desirable value.
Backlight - Adjust brightness of lamps.
Advance Picture Adjust- Press the enter button, "Advance
Picture Adjust" window appears.
3.5.2-Video
Contrast
Brightness
Saturation
Hue
Sharpness
Phase
Color Temperature
Back Light
Advance Picture Adjust
80
55
60
0
4
5
User
Bright
Press Enter
Video
Select
Exit
Enter
DNR
CT1
Flash Tone
Adaptive Luma Control
Low
Middle
Off
On
Video
Select
Exit
Enter
DNR- Option include off/low/middle/strong, select "on" to control
the sharpness and noise reduction automatically.
CTI- Option include low/middle/strong/off.
Flash Tone-Select "on" to correct the flash tone automatically.
Adaptive luma control- user selects either on or off.
Language-Changes the language of the On-Screen Display (OSD)
menu. Options include French, Spanish or English.
V-Chip-Prevents views watching programs that are not age-
appropriate, such as programs containing violence or adult
language.
Blue Back-Selects "ON" to set screen to a pleasant blue
background when it detects no signal available if turns on.
Closed Option- Chooses one of the following options:
OFF/C1/C2/C3/C4/T1/T2/T3/T4.
Default-Resets the display back to the factory default settings.
3.5.3-Setup
Setup
Select
Exit
Enter
Language
V-Chip
Closed Caption
Blue Back
Default
English
Press Enter
Off
On
Press Enter
Available for the following input sources-AV,S-Video,
YPbPr1, YPbPr2, HDMI, DTV or ATV.
Contrast-Adjusts the level of white between the lightest and
darkest portions of an image, If the contrast is too low, the picture
appears dark and lacks detail. If The contrast is too high, the
picture appears faded and lacks shadow and depth.
Brightness-Adjusts the black levels of the picture, Users may
need to readjust the brightness after the TV warms up.
Saturation- Adjusts the levels of white and color in the picture.
Highly saturated colors then to be deep and strong while
unsaturated colors are weaker and lighter.
Hue-Adjusts to make the flesh tones more natural.
Sharpness-Adjusts the clarity of the picture. If the sharpness is set
too high, hard edges in the picture appear to have a ghost image.
Phase- Adjust the phase by pressing , this feature is only used
for YPbPr input sources.
Color Temperature-Option include user, cool, middle or warm,
if you select the item of "User" and press "Enter" button, a status
bar below comes up for you to adjust the color temperature to your
desirable value.
Backlight - Adjust brightness of lamps.
Advance Picture Adjust- Press the enter button, "Advance
Picture Adjust" window appears.
3.5.2-Video
Contrast
Brightness
Saturation
Hue
Sharpness
Phase
Color Temperature
Back Light
Advance Picture Adjust
80
55
60
0
4
5
User
Bright
Press Enter
Video
Select
Exit
Enter
DNR
CT1
Flash Tone
Adaptive Luma Control
Low
Middle
Off
On
Video
Select
Exit
Enter
DNR- Option include off/low/middle/strong, select "on" to control
the sharpness and noise reduction automatically.
CTI- Option include low/middle/strong/off.
Flash Tone-Select "on" to correct the flash tone automatically.
Adaptive luma control- user selects either on or off.
Language-Changes the language of the On-Screen Display (OSD)
menu. Options include French, Spanish or English.
V-Chip-Prevents views watching programs that are not age-
appropriate, such as programs containing violence or adult
language.
Blue Back-Selects "ON" to set screen to a pleasant blue
background when it detects no signal available if turns on.
Closed Option- Chooses one of the following options:
OFF/C1/C2/C3/C4/T1/T2/T3/T4.
Default-Resets the display back to the factory default settings.
3.5.3-Setup
Setup
Select
Exit
Enter
Language
V-Chip
Closed Caption
Blue Back
Default
English
Press Enter
Off
On
Press Enter
www.astarelectronics.com
40
C. T. R
C. T. G
C. T. B
Load From
+1
+1
-1
Warm
Video
Select
Exit
Enter
Available for the following input sources-AV,S-Video,
YPbPr1, YPbPr2, HDMI, DTV or ATV.
Contrast-Adjusts the level of white between the lightest and
darkest portions of an image, If the contrast is too low, the picture
appears dark and lacks detail. If The contrast is too high, the
picture appears faded and lacks shadow and depth.
Brightness-Adjusts the black levels of the picture, Users may
need to readjust the brightness after the TV warms up.
Saturation- Adjusts the levels of white and color in the picture.
Highly saturated colors then to be deep and strong while
unsaturated colors are weaker and lighter.
Hue-Adjusts to make the flesh tones more natural.
Sharpness-Adjusts the clarity of the picture. If the sharpness is set
too high, hard edges in the picture appear to have a ghost image.
Phase- Adjust the phase by pressing , this feature is only used
for YPbPr input sources.
Color Temperature-Option include user, cool, middle or warm,
if you select the item of "User" and press "Enter" button, a status
bar below comes up for you to adjust the color temperature to your
desirable value.
Backlight - Adjust brightness of lamps.
Advance Picture Adjust- Press the enter button, "Advance
Picture Adjust" window appears.
3.5.2-Video
Contrast
Brightness
Saturation
Hue
Sharpness
Phase
Color Temperature
Back Light
Advance Picture Adjust
80
55
60
0
4
5
User
Bright
Press Enter
Video
Select
Exit
Enter
DNR
CT1
Flash Tone
Adaptive Luma Control
Low
Middle
Off
On
Video
Select
Exit
Enter
DNR- Option include off/low/middle/strong, select "on" to control
the sharpness and noise reduction automatically.
CTI- Option include low/middle/strong/off.
Flash Tone-Select "on" to correct the flash tone automatically.
Adaptive luma control- user selects either on or off.
Language-Changes the language of the On-Screen Display (OSD)
menu. Options include French, Spanish or English.
V-Chip-Prevents views watching programs that are not age-
appropriate, such as programs containing violence or adult
language.
Blue Back-Selects "ON" to set screen to a pleasant blue
background when it detects no signal available if turns on.
Closed Option- Chooses one of the following options:
OFF/C1/C2/C3/C4/T1/T2/T3/T4.
Default-Resets the display back to the factory default settings.
3.5.3-Setup
Setup
Select
Exit
Enter
Language
V-Chip
Closed Caption
Blue Back
Default
English
Press Enter
Off
On
Press Enter
www.astarelectronics.com
40
C. T. R
C. T. G
C. T. B
Load From
+1
+1
-1
Warm
Video
Select
Exit
Enter
 previous next