Bang & Olufsen BeoVision 9 Flat Panel Television User Manual


 
HDR – Pause and replay
With the optional hard disc recorder, pause, repeat and
resume the current programme. The TV continues saving
during replay, so you are sure to see the entire programme.
Glossary
Replay
Slow replay
Save the replay
buffer
You cannot pause or replay a programme while the TV is recording another programme or copying a recording,
nor can you pause or replay programmes copy-protected by Macro vision. If you pause a programme for three
hours, the TV automatically starts replay from the point at which you paused the programme.
Slow replay backwards is not possible.
Copy the content of the replay buffer to the ‘HARD DISC CONTENT’ list. The content before the recording
start time will be deleted when the TV is switched off.
The current channel is saved in a
three-hour replay buffer
Cue backwards or forwards
Step backwards or forwards
Go to a specic point
Pause
Go to live signal or replay mode
Press button again to change speed.
Pause replay of the buffer content.
Pause replay
Save the replay buffer
Save the buffer contents to the hard disc recorder.
Replay
Pause the programme on the current channel.
Step backwards or forwards minute by minute.
Replay a programme that you have paused.
Switch between the live signal and replay mode.
Enter a specic time to go to in the buffer content.
Beo5 operation
- 0:19 REPLAY -0:05
8
The current picture is 5 minutes behind the
live signal
19 minutes are saved in the
replay buffer