Filter
Top Products
Expand your setup, for example in a home cinema system with a projector and a
home automation system.
Home cinema setup
Use a projector or connect a home automation
system to the TV, so you can control room lights
and curtains.
BeoMaster
If your TV is equipped with a BeoMaster, use the
Ethernet socket on the side connection panel for
connection to the Internet, and the two USB
sockets to connect extra equipment to the
BeoMaster, for example a memory card reader.
Audio system
Connect a Bang & Olufsen audio system with a
Master Link socket to your TV. Connect it to the
Master Link socket on the side connection panel.
See also pp. 18–19.
Mains cord and plug The supplied mains cord and plug are specially designed for the TV. If you change the plug or in any way
damage the mains cord, it can affect the TV performance. Connect the ~ socket on the side connection
panel of your TV to the wall outlet. The IR-receiver lights up in red and the TV is in standby mode and
ready to be used.
IR-receiver
If the built-in IR-receiver for the remote control
signals is hidden behind a lowered projector
screen, you must set up an external IR-receiver as
well.
Ethernet
USB
USB
ROUTER
Internet
ML
DISPLAY 2
IR 1+2
IR-IN
CINEMA
Home
Automation
system
49