Filter
Top Products
Calibrate the speakers
Set up the speakers to optimise sound from
your listening position.
Calibrate the stand
The motorised movement of the TV will not
work until the calibration process has been
completed.
First-time setup of loudspeakers applies only to speakers for TV viewing.
After rst-time setup, you can set up speakers for Home cinema viewing.
See also ‘Loudspeaker setup’ on pp. 54–55 and ‘Surround sound and
Home cinema’ on p. 30.
Adjust volume, bass, treble and loudness and preset two default speaker
combinations. Select a different speaker combination at any time. See
p. 35.
At ‘SET LEFTMOST
POSITION’ turn left to the
point you wish to restrict
the movement to
At ‘SET RIGHTMOST
POSITION’ turn right to the
point you wish to restrict the
movement to
Accept
Set preferred preset position for the TV to turn to, when it is switched
on and off. See p. 56.
NOTE! You need to calibrate the stand before you
can use the motorised movement of the stand.
When rst-time setup is complete, you can then set up your loudspeakers for Home
cinema use.
Stand adjustment Set the maximum angle the TV will turn – left and right.
STAND POSITIONS
SPEAKER TYPES
SPEAKER ROLES
SPEAKER DISTANCE
SPEAKER LEVEL
SOUND ADJUSTMENT
STAND ADJUSTMENT
53