Filter
Top Products
First-time setup of your television
Menu language
TV tuner
Connections
Auto tuning
Select the language for on-screen menus.
The ‘TUNING’ menu is only available if the TV tuner is enabled, see pp. 38 and
58.
Select the type of equipment connected to each socket, the sockets used, the
product name, and the source name.
A menu for channel tuning automatically appears on the screen.
Information
This rst-time setup procedure is activated when the TV is connected to the mains
and switched on for the rst time. If you want to change your setup at a later date,
you can access the same menus and update your settings.
Switch on the TV
Make settings
You are led through the following settings only
when you switch on the TV for the rst time.*
1
It takes the TV approx. 20 seconds to start up and
become ready for use.
Switch on
Select setting Accept and go to next menu item
Set the on-screen menu language
Disable or enable internal TV tuner or DVB
Register connected equipment, see p. 47
Tune in TV channels automatically, see also p. 34. Available only if
the TV tuner is enabled, see p. 38
1
*NOTE! When you have made the preferred
settings in a menu, you may have to press the
green button to continue to the next menu in the
rst-time setup procedure. Follow on-screen
instructions.
TV
MENU LANGUAGE
TUNER SETUP
CONNECTIONS
AUTO TUNING
52