Filter
Top Products
Register additional equipment
Register the equipment you have connected to
the TV, if it is not detected automatically by the
TV. Repeat the procedure for each socket group.
Select ‘STANDBY
OPTIONS’ menu
Select
‘CONNECTIONS’
in ‘OPTIONS’
menu
Bring up ‘TV
SETUP’ menu
Select sockets
in a socket
group and
register
‘(VGA)’
‘(Y – Pb – Pr)’
‘STANDBY OPTIONS’
Equipment connected via VGA socket (AV5, available if you do not have the optional BeoMaster, or AV6).
Equipment connected via Y – Pb – Pr socket (AV2 or AV3).
Set the set-top box to switch off when you switch source or when you switch off the TV. You can also
choose that the set-top box should always be switched on or that it should be switched on and off
manually by means of the remote control.
Follow on-screen
instructions
Source options in
the ‘AV1–AV6’
menus
Contents of the
‘CONNECTIONS’
menu
The above are only examples of registrations, you
can register available equipment to any source
option. You may also have to register additional
equipment in the Master Link system.
47
NONE
V.MEM
DVD/DVD2
DTV2 (V.AUX)
DTV
V.AUX2
TV
PC
CENTRE
Nothing connected
Optional hard disc recorder or connected video
recorder
Connected DVD player or recorder
Equipment, such as a set-top box
Equipment, such as a set-top box
Equipment, such as a video game console
Connected TV tuner
BeoMaster or connected PC
For connection of a source centre, which may
contain up to six built-in sources (only in the
‘AV2’ menu)
AV1–AV6
DISPLAY 2
HDMI EXPANDER
LINK
Register connected equipment
Register a connected projector
Enable or disable an HDMI Expander connected
to the HDMI C socket
Set a link frequency and enable the system
modulator