Filter
Top Products
The pincode system
NOTE! If you are prompted for a pincode the
rst time you switch on your TV, contact your
Bang & Olufsen retailer. To cancel a pincode
entry and clear the input elds, press BACK. On
Beo4, press STOP.
2
*On Beo4 hold to bring up the ve elds.
1
*Change of pincode
Incorrect pincode
If you change your pincode more than ve times within a three-hour
period, the ‘PINCODE’ menu becomes inaccessible for three hours,
assuming that the TV is not disconnected from the mains.
Five incorrect entries will cause the TV to shut down for three hours,
during which operation is not possible. Disconnecting the TV resets the
three-hour period.
The pincode system prevents people who do not know the pincode from using
the TV. When the pincode system is activated and the TV has been
disconnected from the mains for 15–30 minutes, the system goes into effect.
Activate the pincode system
Enter a four digit pincode to activate the system.
Re-enter the code
and accept
Bring up ‘TV SETUP’
menu
Delete the pincode
Delete the pincode you have chosen.
Select ‘DELETE
PINCODE’ and accept
Bring up ‘TV SETUP’
menu
Enter a four digit
code and accept
Enter pincode and
accept
Change the pincode
Change the pincode you have chosen.*
1
Enter new code,
accept, re-enter code
and accept
Bring up ‘TV SETUP’
menu
Enter the pincode
If you cannot switch on the TV after
disconnection from the mains, wait 30 seconds
and try again.
Accept Enter pincode
Enter pincode,
accept and select
‘NEW PINCODE‘
Press
twice
Press
Press
twice
Press
Press
twice
Press
If you forget the pincode
Contact your Bang & Olufsen retailer to receive
a ve digit mastercode.
Accept to delete pincode, you can now
activate pincode system again
Enter ve digit
mastercode
Hold when prompted
for pincode to display
ve elds*
2
STOP
STOP
STOP
37