Filter
Top Products
44 Remote Control Panel User’s Guide ● Rev 00
6. Once the file is selected, click on the “Press to Upload the File” button.
IMPORTANT: The full upgrade process can take up to three minutes to
complete. Once the upload stage has begun, DO NOT reset or power off the
unit until it produces a series of three short beeps to indicate upgrade
completion.
7. After the series of three short beeps are heard, you can close your web browser and
power cycle the RCP-120.
8. After the unit has rebooted, press and hold buttons 11 and 12 for a couple of
seconds to see that the new firmware version is running per the text displayed in
button 12.
9. This completes the steps necessary to upgrade the RCP-120.