BenQ MK2443 Flat Panel Television User Manual


  Open as PDF
of 64
 
English
20 Using the remote control
Using the remote control
Power on, o and standby
Turning on the TV
AerpluggingtheTV'spowercableintoawalloutlet,theTVwillenterstandbymode
automatically. e power indicator will light up orange. Press Power on the remote
control. e TV will turn on and the power indicator will change to blue.
Putting the display to standby
Press Power on the remote control again, and the TV will return to standby mode. e
power indicator will turn orange.
e display still consumes a very small amount of power (about 0.5W) in standby mode.
Switching inputs
Adjusting sound setting
Adjusting volume
• PressVOL on the remote control to increase volume. e volume indicator
increases in length as volume rises.
• PressVOL on the remote control to decrease volume. e volume indicator
decreases in length as volume falls.
Mute setting
Press MUTE on the remote control to turn o the sound temporarily.
Press
MUTE once more, or press VOL to restore the sound level.
Selecting a TV sound mode
Press TV AUDIO on the remote control to toggle TV sound among available modes. (e
modes available will depend on the TV or Video sound system being received).
1. Turn on all connected equipment or devices before
selecting an input.
2. Press
INPUT on the remote control to view the current
selected input. Press INPUT button, use
▲▼
button
to select your desired input then press OK button to
conrm. You can also press INPUT continuously to
switch between dierent input sources.
• eseoptionswillonlyappearwhencorrespondingsignals
are connected to the display.
• BeawarethatHDMIinputmustbeHDCP-complianttobe
displayed.
When switching to the HDMI inputs, the display needs
several seconds to detect the HDCP information from the
signal source and no image will be displayed during this
period. is is not a malfunction.
Downloaded From TV-Manual.com Manuals
 previous next