Select using the [ ], [ ] buttons, press the [SELECT] button and the system will play in the corresponding repeat mode.
NORMAL PLAY 05/17 STEREO
NORMAL
NORMAL PLAY 05/17 STEREO
NORMAL
PBCOFFNORMAL
Playback Mode Control
Sequence Playback
Repeat Playback
Mediaandplaymode
Ending Playback
PLAYBACK MODE
DVD55RW i
If the disc is loaded in the opposite side or badly damaged, the OSD will display "NO DISC".
Notes
This unit has several playback modes: sequence playback, repeat playback, program playback and random playback.
The operation steps are as follows:
Display the control bar of the playback mode.
Select the first item of the control bar by using the [ ], [ ] and [SELECT] buttons, then the screen displays as follows:
Select the value of "NORMAL" by using the [ ], [ ] buttons, press the [SELECT] button, and the system will enter the
sequence playback mode.
Pressing the [PLAY] button can also enter the sequence playback mode.
This unit has many repeat modes: repeat title (only for DVD), repeat chapter (only for DVD), repeat entire disc (SVCD/VCD),
repeat all (DVD), repeat song and so on.
In the playback control bar, select the Playback Mode Control item by using the [ ], [ ] and [SELECT] buttons.
If the selected value is "A-B", after pressing the [SELECT] button, the system will indicate that pointA has been confirmed.
Press the [SELECT] button again to confirm the next point, i.e. point B..The unit repeats the chosen segment continuously
between pointsA and B.
This unit has many different playback functions, some of which may vary from disc to disc.
1. NORMAL Sequence Playback
2. A-BA-B Playback
3. C-RPT Segment Repeat Playback
4. T-RPTTitle Repeat Playback
5. D-RPT Disc Repeat Playback
6. TR-RPT
7. S-RPT Song Repeat Playback
8. PROG Program Playback
9. RANDOM Random Playback
29.
Track Repeat Playback