Welcome i
Remote
Monitor
Software
on PC
Access
Bank II
Access
Bank II
modem
modem
Remote
Monitor
Software
on PC
PSTN
Access Bank II
Welcome to Access Bank II T1 Voice Switch & Data Multiplexer from Carrier Access Corporation.
Access Bank II connects your company’s telephony and data networks to outside public and private
network DS1 services with up to 3.072 Mbps of synchronous bandwidth capacity.
The Access Bank II combines the functions of intelligent Channel Service Units (CSUs)/Data Ser-
vice Units (DSUs), digital cross-connect (DCS), and digital voice switch into one product.
The Remote Monitor provides a convenient and user-friendly software interface for configuring,
monitoring, and testing the performance of the Access Bank II. The Access Bank II Remote Monitor
software interface connects to the Access Bank II through the RS-232 Management/Data Port on the
front control panel. Once the Remote Monitor application is installed on an IBM-compatible PC, you
can connect to the RS-232 Management port through a Hayes compatible modem or through a direct
connection. The Remote Monitor application can also be used from a remote PC for dial-in/dial-out
management over a separate PSTN (Public Switched Telephone Network) analog line.