Filter
Top Products
Connecting (Cabling) Each MVP™
-12- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
6. Connecting (Cabling) Each MVP™
Testing Signal
and Power
Connections
Each MVP™ has two (2) power supply sockets and two (2) signal sockets.
· The Power and Signal IN are located on the upper right-hand corner of each panel.
· The Power and Signal OUT are located on the upper left-hand corner of each panel.
· The Signal IN and OUT may be used interchangeably.
Each MVP™ has LED indicator lights.
· Each panel indicates a successful power connection when the Power indicator light
remains red.
· Each panel indicates video signal reception when the Signal LED indicator light
displays green. This light should be blinking rapidly to indicate good reception.
Using the MVP™
Test Button
Each MVP™ also has a Test button, used to ensure all LED strips in each panel
are
functional. Use the Test Button on each panel to perform a self-test. If self-
testing, you
must perform the test individually for each MVP™.
You do not need to connect to a signal
or use software.
When using the Test button, make sure the MVP™ is not connected to the MVP™ Driver.
To use the Test Button, you must connect the power, but do not connect the signal
cables.
1. Press the Test button to view various LED strip configurations on each MVP™.
2. Press the Test button one time and all the LED strips should display.
3. Press the Test button again to toggle through various LED light display configurations.
Signal Input
Power Input
Power Output
Power LED
Test Light
Link (Signal)
LED Test Light
Test Button
Signal Output