Chauvet 37.5 VCR User Manual


 
Setup
MVP(12/18/37.5) Series Getting Started User Manual, Rev. 10 -3-
2. Introduction
Product
Description
The MVP™ is a Modular Video Panel. The MVP™ series includes three models:
· MVP™ 12
· MVP™ 18
· MVP™ 37.5
Each model is a panel consisting of multiple LED full-color light strips. The number in each
model name indicates the pixel pitch (distance, in millimeters, between the LED light
strips) of that model. When multiple panels are assembled and connected (signal and
power), the entire configuration becomes a modular video wall design.
The outer dimensions of each panel are identical. The difference between each model is
the spacing between the LED light strips and the number of LED pixels on each strip. Both
of these values determine the total number of LED pixels provided on each panel. Each
pixel is one SMD5050 LED.
The aluminum alloy and stainless steel construction make the MVP™ reliable and solid,
as well as easy to install and dismantle. You can assemble multiple panels horizontally or
vertically, and each model is interchangeable with the others. This flexibility provides
numerous modular design possibilities.
The MVPvideo wall system is controlled using a PC and the LED Studio software
available as download from the Internet. Refer to the LED Studio User Manual for
detailed information and instructions on using LED Studio.
Features
· Packaged in a convenient CHAUVET® flight case that includes either two (2) or
six (6) MVP™ panels
· Lightweight, modular system
· Provides multiple graphics based on which MVP™ is used and how the video wall
is assembled
· Uses Neutrik® powerCON® and Neutrik® etherCON® connectors for easy
installation and connectivity
· Perfect for long-term installations
· Each MVPis interchangeable for creative modular video wall designs
· Tri-color SMD LEDs provide better image quality and wider viewing angle
· Designed for indoor or temporary outdoor installations
·
Easily viewed during daylight operation
Additional
Features
· One Neutrik® etherCON® signal cable per MVP™ 0.4 m/15.8 in
· One Neutrik® powerCON® power cable per MVP™ 0.4 m/15.8 in
Additional
Products
· MVP™ Driver (required)
· MVP™ 526P Signal Processor (processor required for alternate video sources)
Optional
Accessories
· MVP™ Signal Distributor (required when using 25 MVPs or more in your video wall)
· MVP™ Rigging Kit (required when you hang panels from a truss or truss structure)
Available Signal
and Power Cables
(optional)
· Signal cables (Neutrik® etherCON® Signal Extensions)
·
MVPU-SIG5FT
·
MVPU-SIG10FT
·
MVPU-SIG25FT
· Power cables (Neutrik® powerCON® Extension)
·
PCEXT5FT
·
PCEXT10FT
·
PCEXT25FT
·
PCLEAD50FT