Clarion TB851P Flat Panel Television User Manual


 
280-8212-00
TB851P/TB853W 13
English
To view video images:
How to connect to video
Use the VTR mode to transfer output audio or
images such as video.
Video out/VTR
input cable
CCA-623-500
(sold separately)
To audio
OUT terminal
To video
OUT terminal
Black
Left
Right
Gray
White
Yellow
Black
Black
Red
Yellow
Video (video camera) etc.
Notes:
Always turn off the power on this unit and the
video (video camera, etc.) when connecting.
Before connecting, always check the instruction
manual of the device for connection.
•To ensure driving safety, just as with the TV
images, even when the VTR is connected, video
images will not appear on the display while the
vehicle is moving and only the sound can be
heard. The VTR images are viewable only when
the vehicle parking brake is engaged.
Video from external devices connected to VTR1
or VTR2 can be viewed on a rear monitor sold
separately.
Operating with an external device
Select the video mode
1. Press the [SRC] button to select VTR1 or
VTR2. The setting shifts in the sequence
shown below, each time the [SRC] button is
pressed.
TV VTR1 VTR2 VISUAL1
VISUAL2 TV
Notes:
See the instruction manual for the connected
device to learn how to operate the video
equipment.
Press the [SRC] button to return to TV mode.
To view other images:
Connecting to other video
Video images from external devices can viewed
on this unit by connecting the video output
terminals on the external device to the video in
terminals (visual input 1 or visual input 2) on this
unit.
Notes:
Always turn off the power on this unit and the
external devices when connecting.
Before connecting, always check the instruction
manual of the device for connection.
•To ensure driving safety, video images will not
appear on the screen while the vehicle is moving.
The VTR images are viewable only when the
vehicle parking brake is engaged.
•Audio cannot be heard in VISUAL mode.
*TB851P/TB853W(09-20)E 05.2.25, 11:26 AM13