Filter
Top Products
18 TB851P/TB853W
280-8212-00
English
Select PAL or NTSC
This setting allows you to select the video
system for input to the VTR.
This can be separately set for VTR 1, VTR 2,
VISUAL 1 and VISUAL 2.
∗ The factory setting is at “AUTO”.
• This setting can be made in the VTR and
VISUAL modes.
1. Select “PAL/NTSC” on the ADJ_OTHER
screen.
2. Press the [A] or [D] button and select
“PAL”, “NTSC” or “AUTO”.
Setting the caution message for use
during CCD camera operation
This setting can be made while the CCD
camera image is displayed.
∗ The factory setting is at “ON”.
1. Select “CAUTION” on the ADJ_OTHER
screen.
2. Press the [A] or [D] button and select
“ON” or “OFF”.
Changing the settings (ADJUST mode)
*TB851P/TB853W(09-20)E 05.2.25, 11:26 AM18