Clarion TB851P Flat Panel Television User Manual


 
280-8212-00
TB851P/TB853W 17
English
Changing the settings (ADJUST mode)
Select the FM modulator and RCA
audio output levels
The factory setting is at “HIGH”.
In TV mode, the FM modulator output is at
HIGH”, even when set to “LOWduring TV
mode.
Not displayed during VISUAL mode.
1. Select “AUDIO LEVon the
ADJ_EXTERNAL screen.
2. Press the [A] or [D] button to select the
HIGHor “LOW”.
HIGH : Outputs signal at same level as the
audio from the car radio.
LOW : Lowers the output level to -6dB.
(Set to LOW when audio is
distorted when set at HIGH.)
Set the LCD panel angle (in
airconditioning mode)
The factory setting is at “”.
1. Select “TILTon the ADJ_HVAC screen.
2. Press the [A] or [D] button and select
”, “30°or “50°”.
Set the LCD panel operating time
(in airconditioning mode)
The factory setting is at “10 sec”.
1. Select “TILTon the ADJ_HVAC screen.
2. Press the [A] or [D] button to select
5sec”, “10secor “30sec”.
Set the beep tone used for button
operation
The beeping sound heard when pressing the
keys is called the beep tone.
The factory setting is at “ON”.
1. Select “BEEPon the ADJ_OTHER screen.
2. Press the [A] or [D] button and select
ONor “OFF”.
Set the number of multiscreens (list
screen)
The factory setting is at “12”.
1. Select “LISTon the ADJ_OTHER screen.
2. Press the [A] or [D] button and select “8
or “12”.
Select the country (only on TB851P)
Setting the country name here, automatically
sets the video standard and audio frequency
band for that country.
Select the country name from:
• STANDARD • AUSTRALIA
• CHINA • HONG KONG
• NEW ZEALAND
1. Select “COUNTRYon the ADJ_OTHER
screen.
2. Press the [A] or [D] button and select the
country.
*TB851P/TB853W(09-20)E 05.2.25, 11:26 AM17