Clarion TB851P Flat Panel Television User Manual


 
280-8212-00
TB851P/TB853W 11
English
WARNING
For your safety, the driver should not
watch or operate TV while driving. Viewing
and operating the TV while driving are
prohibited by law in some countries.
Watching TV
Note:
•For your safety, the TB851P/TB853W has a safety
function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking brake is applied.
1. Press the [SRC] button and select the TV
mode.
2. Press the [A] or [D] button to tune in the
desired TV station.
Manual tuning
Press the [A] or [D] button to select the
channel.
The channel number appears at the top right of
the screen.
Each time the [A] or [D] button is pressed, the
channel number increases or decreases by 1.
Seek tuning
Press and hold the [A] or [D] button for 1
second or longer.
The seek tuning mode is now selected. Tuning
will stop automatically at a channel where a
broadcast is received.
If seek tuning stops before or after a broadcast
channel, then press the [A] or [D] button
again.
Recalling a preset station
A total of 12 TV stations can be stored. This
allows you to select your favorite TV stations
and store them in memory for later recall.
1. Press the [w] or [z] button to select a
preset channel.
You can now view the channel you stored in
the memory.
TV Operation
Select a station from the list
Two types of lists can be displayed. One is the
preset list and the other is the channel list.
The preset list is a list of channels already
stored in the memory.
The channel list is a list of receivable
channels.
Selecting a station from the preset list
1. Press the [P.LIST] button shown on the main
screen of the TV.
Preset list screen appears.
2. Select a channel by pressing the [A], [D],
[w], or the [z] button.
3. Press the [ENT] button for that channel.
Selecting a station from the channel list
1. Press the [CH.LIST] button shown on the
main screen of the TV.
A list of receivable channels appears on the
channel list screen.
2. Select a station from the preset list using
steps 2 and 3 above.
Notes:
Either 8 or 12 screens can be displayed.
The factory setting is “12 Stations”.
•To change the number of broadcast stations
displayed on the list screen, see “Set the number
of multiscreens”. (See page 17.)
*TB851P/TB853W(09-20)E 05.2.25, 11:26 AM11