16
English
Owner’s Manual
TVX5653
TV Mode Operations
3) Press either the FM modulator frequency 1
button 9 or the FM modulator frequency 2
button 8.
*The FM modulator frequency is set as follows:
• FM modulator (FRQ1): 88.3 MHz
• FM modulator (FRQ2): 88.7 MHz
Adjusting the brightness and tone
of color
1) Hold down the center of the joystick # for
about 2 seconds.
The screen adjustment mode now appears.
*Start the adjustments while the adjustment dis-
plays are on the screen. These displays will be
automatically cleared after about 5 seconds.
2) Press the joystick # up (w) or down (z) to
select what is to be adjusted, and then press
it to the left (Å) or right (Î) to make the
adjustment.
*The pointer which indicates the adjustment
position moves one scale increment when ini-
tially pushed once. It then moves one scale
increment when it is pushed 5 times.
Note:
• There is no hue adjustment for the PAL TV sys-
tem.
How to connect the unit with a VTR
Notes:
• Before proceeding with the connections, make
absolutely sure that the power of the unit and
VTR (or video camera) has been turned off.
• Before proceeding with the connections, refer
to the Instruction Manual of the unit which is to
be connected.
Note:
• You will need an AV connecting cord (CCA-
357-500) purchased separately to convert the
RCA pin cord into a stereo mini jack in order to
connect an integrated camera/VTR unit to the
unit.
Watching a video tape
Refer to the Instruction Manual of the unit con-
cerned for details on operating the video unit
connected.
1) Press the TV/CD button 2 to select the TV
mode.
2) Press the joystick # up (w) or down (z) to
select VTR.
Each time the joystick # is pressed up (w)
or down (z), the setting is switched in the
sequence shown below.
Note:
• When a VTR has been connected to the sys-
tem expansion terminals on the unit’s rear
panel, the setting is switched in the sequence
shown below.
