Contemporary Research IP-HDVR TV Receiver User Manual


 
AV and Control Connection
RF
TV Antenna F connector for off-air MATV signals
Cable F connector for CATV input
The IP can receive both at the same time, when the TV Guide is set to receive Cable;
the tuner will first search for analog cable channels, then digital off-air broadcasts, and
then goes back to cable to search for digital cable broadcasts.
AV Sources
AV IN 1 RCA composite video, and stereo audio inputs – upscaled to HD output settings, also
used for Cable Box AV input
AV IN 2 Composite, S-Video, and stereo audio inputs – upscaled to HD output settings
Cable Box IR Out 1/8” mini jack connects G-Link cable for controlling cable box.
AV Outputs
AV 1 S-Video and RCA composite video and fixed-level analog audio outputs. Video is
switched with HD output, audio is always present
AV 2 RCA composite video and variable-level analog audio outputs. Video is switched with
HD output, audio is always present
Digital Outputs
YPbPr
3 RCA Pr, Pb, Y outputs (1080i/720p/480p/480i)
Optical Audio TOSlink optical output, Dolby 5.1 or PCM digital audio
RGB
RGB DB-15 female (1080i/720p/480p)
DVI
DVI-D with HDCP (1080i/720p/480p), HDMI video with optional adapter
IEEE-1394 2 4-pin data ports, i-Link/1394
Control
Service RS-232 port for factory upgrades only
RS-232 DB-9 male acts as programming and control system port, also acts as pass-through
control port to video display, when control system integrated via Ethernet
Ethernet RJ-45 connection offers bi-directional IP Telnet control and access to Web page
IR In Input accepts wired IR from control system, external IR-RXC sensor, or ChannelPlus,
Audioplex, SpeakerCraft, or Xantech remote IR sensors
Contemporary Research 7 IP-HDVR HD Tuner-DVR