Filter
Top Products
43
ENGLISH
[2] Setting the parameters in the PLII CINEMA, PLII MUSIC and PRO LOGIC modes
• When PLII CINEMA, PLII MUSIC or PRO LOGIC is selected in the 2-channel mode, more detailed parameters can also be set for the different
modes.
PLII MUSIC mode: Use the procedure described below to make the settings.
PLII CINEMA and PRO LOGIC modes: Refer to step 6 on pages 44 and 45.
• Program sources marked in parentheses and 2-channel sources (CDs, etc.) are decoded using Dolby Pro-Logic II
processing and played in the multi-channel mode.
q Cinema (PLII CINEMA) mode: This mode is suited for movies and other Dolby Surround programs.
w Music (PLII MUSIC) mode: This mode is suited for stereo music programs.
e Pro-Logic (PRO LOGIC) compatible mode: This is the conventional Dolby Surround Pro-Logic mode.
VOLUME
ENTER
BAND
MODE
MENU
FUNCTION
DISPLAY RETURN INPUT MODE SURROUND
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE
AUDIO
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT
REPEAT A-B
REPEAT RANDOM
DVD
TV/VCR
CH
VOL
SLEEP
ON
OFF
REMOCON MODE
2
3
4
56
8
9
CLEAR
CALL
0
+10
7
1
STATUS
CDR/MD/TAPE
TUNER/TV/VCR
VCR POWERVCR POWER
TV POWERTV POWER
TV
VCR
NTSC/PAL
MEMO
POWERPOWER
CH
CH
CH
2
1,3
1,3
2
Set the surround parameters
according to the selected mode.
• The parameters switch as shown
below each time the button is
pressed.
DEFAULT
DEFAULTPANORAMA
DIMENSION
CENTER WIDTH
DEFAULT
PL
II CINEMA PLII MUSIC PRO LOGIC
SURR.PARA
Remote control unit
1
At the 2-channel setting (page 41),
select PLII C, PLII M or PRO
LOGIC.
Remote control unit
3
Set the various surround parameters.
• PANORAMA setting
PANORA ON
OFF
ON OFF
• DIMENSION setting
DIMENSION 3
0 3
,/
6
,/
... ...
• CENTER WIDTH setting
CENTER WIDTH 0
0 4 7
,/
... ...
• DEFAULT setting
DEFAULT Y
/N
YES
Y/N
NO
,/
If “YES” is selected, the settings are reset to the factory
defaults.
Once the surround parameters have been set, stop operating
buttons. After several seconds the display returns to normal and
the settings are automatically validated.
This completes the setting of the parameters.
NOTES:
• The 2-channel mode setting is stored in the memory for the
individual functions.
• It is not possible to play DTS digital input sources in the Dolby
mode.
The selected setting (“ON” or “OFF”) flashes.