Denon ADV-1000 DVD Player User Manual


 
ENGLISH
53
(3)
Presetting FM and AM stations
Example: Presetting FM station (currently tuned in) at preset number P03
1
Tune in the broadcast station that is to be preset and press
the Memory button.
A P0 - (P1-, P2- or P3-) indication flashes for 10
seconds.
2
While the P0 - (P1-, P2- or P3-) indication is flashing,
use the shift button and the channel (CH) buttons (, +) to
display the preset number P03.
3
Press the MEMORY button while the P03 display is
flashing.
The P03 display will light and presetting will be
completed.
Presetting
Up to 40 AM or FM stations can be preset using this procedure.
In addition to the reception frequency, the reception mode (monaural or auto) is also preset, so check the display when presetting stations.
If a station is preset at a number where a station is already preset, the previous station is replaced with the new station.
The preset memory is not cleared when the power cord is unplugged.
(4)
Listening to preset stations
Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)
1
Press the remote control shift button and the channel (CH)
button (, +) and select preset number P03.
Each press of the shift button adds 10 to the current preset
number in the range of P01 to P40.
Example:
Starting with a P13
setting, each press of
the shift button results
in the changes P13 /
P23 / P33 / P03 /
P13 /...
Example:
Starting with a P00 setting, each press of the shift button results in
the changes P0- / P10 / P20 / P30 / P40 / P10 /...
VOLUME
ENTER
BAND
MODE
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE
AUDIO
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT
REPEAT A-B
REPEAT RANDOM
DVD
STATUS
CDR/MD/TAPE
TUNER/TV/VCR
VCR POWER
TV POWER
NTSC/PAL
MEMO
POWER
1,3
2
2
VOLUME
ENTER
BAND
MODE
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE
AUDIO
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT
REPEAT A-B
REPEAT RANDOM
DVD
REMOCON MODE
STATUS
CDR/MD/TAPE
TUNER/TV/VCR
VCR POWER
TV POWER
NTSC/PAL
MEMO
POWER
1
1
NTSC/PAL
MEMO
Remote control unit
CH
Remote control unit
SHIFT
Before operating the remote control unit!
Be sure to press the proper remote control mode selector
button to set the remote control unit to the AV mode.
TUNER/TV/VCR
NTSC/PAL
MEMO
Remote control unit
Before operating the remote control unit!
Be sure to press the proper remote control mode selector
button to set the remote control unit to the AV mode.
TUNER/TV/VCR
CH
Remote control unit
SHIFT