Filter
Top Products
10
ENGLISH
(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors
Y
CB
CR
COMPONENT
VIDEO OUT
R
L
AUDIO
OUT
VIDEO
OUT
S-VIDEO
OUT
DIGITAL OUT
(
PCM/BITSTREAM
)
OPTICALCOAXIAL
COMPONENT VIDEO IN
CR CB Y
AUDIO IN
L
R
To power outlet
DVD-1000
Color component output connectors (C
R, CB and Y)
The red (C
R), blue (CB) and brightness (Y) signals are output independently, achieving more faithful reproduction
of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (P
R, PB and Y/R-
Y, B-Y and Y/C
R, CB and Y, etc.). For details, refer to the TV’s operating instructions.
NOTES:
• Use the three commercially available video cords to connect the DVD-1000’s color component output connectors to the TV or
monitor.
• Set the “AUDIO OUTPUT” in “AUDIO SETUP” in “SETUP” setting to “ANALOG”. (See page 38. Default setting is “ANALOG”.)
• Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” comply with your TV’s video format. When the TV is NTSC formated set to
NTSC. (See page 37)
TV