Denon DVD-1000 DVD Player User Manual


 
13
ENGLISH
(5) Connecting to a Stereo Component
Y
CB
CR
COMPONENT
VIDEO OUT
R
L
AUDIO
OUT
VIDEO
OUT
S-VIDEO
OUT
DIGITAL OUT
(
PCM/BITSTREAM
)
OPTICALCOAXIAL
VIDEO IN
TV
DVD-1000
Stereo component
5
PART NAMES AND FUNCTIONS
(1) Front Panel
q
POWER button
Press once to turn the power on.
• Press again to set to the “OFF” position and turn the
power off.
Set the power to the standby mode by pressing the
POWER button on the remote control unit while the
power is on.
Turn the power on from the standby mode by pressing the
POWER button on the remote control unit.
w
Power indicator
This indicator lights when the power is on and when the
power is in the standby mode.
e
Disc tray
Load discs here.
Press the OPEN/CLOSE button
r to open and close the
disc tray.
The disc tray is also closed when the PLAY button
y is
pressed.
r
OPEN/CLOSE button (5 OPEN/CLOSE)
Press this button to open and close the disc tray.
t
Skip button (8 SKIP)
Press this to move back to the beginning of the current
track (or chapter).
Press again to move back to the beginning of the previous
track (or chapter).
y
PLAY button (1 PLAY)
Press this to play the disc.
u
Skip button (9 SKIP)
Press this to move ahead to the beginning of the next
track (or chapter).
i
STILL/PAUSE button (3 STILL/PAUSE)
Press this to temporarily stop images or music and to play
images frame by frame.
o
Slow/Search button (6 SLOW/SEARCH)
Press this to set the slow play mode and to search in the
reverse direction.
!0
STOP button (2 STOP)
Press this to stop the disc. (See page 20.)
!1
Slow/Search button (7 SLOW/SEARCH)
Press this to set the slow play mode and to search in the
forward direction.
!2
Remote control sensor
!3
Display
Information on the disc that is currently playing is shown
on the display. (See page 14.)
!4
AUDIO OUTPUT button (AUDIO OUTPUT)
Press this to change audio output.
!5
TITLE button (TITLE)
Press this to display the title menu recorded on the disc.
NOTES:
Set the
AUDIO OUTPUT
in
AUDIO SETUP
in
SETUP
setting to
ANALOG
. (See page 38. Default setting is “ANALOG”.)
Set the
TV TYPE
in
VIDEO SETUP
in
SETUP
comply with your TV's video format. When the TV is NTSC formated, set to NTSC.
(See page 37.)