Filter
Top Products
ENGLISH
39
4
✽
To exit the audio output mode
Use the
•
and
ª
cursor buttons to select “AUDIO
SETUP MENU”, then press the SELECT button.
Press RETURN button, you can go back to the
previous screen.
w
When “2 LPCM SELECT (96 kHz
/
48 kHz)” is
selected:
This setting is valid when “DIG./NORMAL” or
“DIG./PCM” is selected for “AUDIO OUTPUT”.
1. OFF (Factory default)
Only linear PCM audio signals recorded at 48
kHz/16 bits are output from the digital output
terminals.
When playing DVDs containing 48 kHz/20 or
24 bit or 96 kHz linear PCM audio signals,
nothing is output from the digital output
terminals.
For DVDs on which no copyright protection
measures are taken, however, the audio
signals are output in the format in which they
were recorded.
2. ON
When playing DVDs containing 48 kHz/20 or
24 bit or 96 kHz linear PCM audio signals, the
signals are converted into 48 kHz/16 bit
signals and output from the digital output
terminals.
(In consideration of copyrights, the actual
PCM audio digital output is under 48 kHz/16
bits.)
✽
To exit the LPCM select mode
Use the
•
and
ª
cursor buttons to select “AUDIO
SETUP MENU”, then press the SELECT button.
Press RETURN button, you can go back to the
previous screen.
LPCM SELECT
1 OF F
2 ON
AUD I O SE TUP MENU
SE T L PCM OF F
Main unit
Remote control unit
Main unit
Remote control unit
SELECT
SELECT