Denon DVD-2910 DVD Player User Manual


 
19
ENGLISH
(2) Rear Panel
!8
Audio output connectors (5.1ch AUDIO OUT)
Connect using an audio cord. Connect a commercially
available pin-plug cord.
!9
Audio output connectors (2ch AUDIO OUT)
Connect using the included audio video cord.
Multi-channel sound is down-mixed and output.
@0
Digital audio output connector (OPTICAL)
Connect using an optical fiber cable (available in stores).
Digital data is output from this connector.
@1
Digital audio output connector (COAXIAL)
Connect using an digital audio cord. Connect a
commercially available 75 /ohms pin-plug cord.
Digital data is output from this connector.
@2
Control output connector (ROOM TO ROOM/OUT)
This is the output connector for wired remote control.
Consult your DENON dealer if you wish to use this
connector.
@3
Control input connector (ROOM TO ROOM/IN)
This is the input connector for wired remote control.
Consult your DENON dealer if you wish to use this
connector.
@4
HDMI output connector (HDMI)
Connect using HDMI connection cord (available in stores).
@5
DVI-D-Video output connector (DVI-D OUT)
Connect using 24P DVI-D connection cord (available in
stores).
@6
S-Video output connector (S-VIDEO OUT)
Connect using an S-Video connection cord (available in
stores).
@7
Video output connector (VIDEO OUT)
Connect using the included audio video cord.
@8
Component video output connectors
(COMPONENT VIDEO OUT)
Connect using video cords (available in stores).
@9
Power input (AC IN)
Connect to AC power supply using the included power
supply cord.
(3) Display
IEEE1394 DVI 720P 1080i
F V
PROGRESSIVE
1 A-B
AUDIO VCD
SUPER DVD
GROUP TITLE TRACK CHAP ANGLE D.MIX PROG RAND TOTAL SING REM HDCD
WMA MP3 HDMI 480P 576P
MPEG JPEG
L.PCMP.PCM
DIGITAL
LFE
LFE
R
SR
SR
C
S
L
SL
SL
qer t y u i
!0
!6
!7
!5!4!3
!
1
!
2
ow
q
Lights to indicate the currently playing disc.
w
Lights in the repeat play mode.
e
These light to indicate the names of sections of the disc
being played.
r
Lights during playback of multiple angles disc.
t
Lights when the audio signals can be down-mixed.
y
Lights in the programmed play mode.
u
Lights in the random play mode.
i
There light to indicate the time display mode.
o
Lights when HDCD is playing.
!0
Lights when SRS TruSurround is on.
!1
Lights to indicate the currently playing audio format.
!2
Lights to indicate the currently playing audio.
L:Front left channel S : Mono surround channel
C:Center channel SR : Surround right channel
R:Front right channel LFE: Low frequency effect
SL : Surround left channel
!3
Lights to indicate the currently playing video type.
F :Film source
V:Video source
!4
Lights when progressive video signals are being output.
!5
Displays the title , track number and elapsed time during
playback.
!6
Lights when the video (or audio) signals is output from
HDMI or DVI terminals.(Lights only one of the HDMI or DVI.)
(Flashes while the connection to the DVI-D or HDMI
connector is being checked.)
!7
Lights to indicate the currently video format of HDMI or DVI
terminals.
(Flashes while the connection to the DVI-D or HDMI
connector is being checked.)