23
ENGLISH
2
3
In the stop mode, press the SETUP button.
• The setup (default settings) screen appears.
NOTE: For some menus, the initial values can be changed
during playback.
LANGUAGE SETUP
Use this to set the language to be used when playing the
disc. If the set language is not offered on that disc, the discs
default language is set.
And use this to set the language for the default setting screen
and messages displayed on the TV screen (“PLAY”, etc.).
DIGITAL INTERFACE SETUP
Use this to set the output of DVI and HDMI terminals.
VIDEO SETUP
Use this to set the DVD-2910/955’s screen mode. (TV aspect
and TV type.)
AUDIO SETUP
Use this to set the DVD-2910/955’s audio output mode.
(Digital and LPCM output settings.)
RATINGS
Use this to disable playback of adult DVDs so that children
cannot watch them. Note that playback of adult DVDs cannot
be disabled if the rating level is not recorded on the DVD.
OTHER SETUP
These include special settings such as CAPTIONS, WALL
PAPER , etc,.
Use the
0
and
1
cursor buttons to select the desired setting
item, then press the ENTER button.
Select “LANGUAGE SETUP”. (See page 26.)
Select “DIGITAL INTERFACE SETUP”. (See page 29.)
Select “VIDEO SETUP”. (See page 32.)
Select “AUDIO SETUP”. (See page 34.)
Select “RATINGS”. (See page 39.)
Select “OTHER SETUP”. (See page 41.)
Remote control unit
Remote control unit
✽
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
1
Turn on the power.
•Press the power button, the power indicator lights green
and the power turns on.
When pressed again, the power turns off and indicator is
off.
• In the standby mode (the power indicator lights red), press
the ON/STANDBY button on the main unit or POWER ON
button on the RC-985.
