Filter
Top Products
33
ENGLISH
3
w
When “TV TYPE” is selected:
NTSC
Select this when your TV’s video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
PAL
Select this when your TV’s video format is PAL.
If PAL is selected, output format is fixed to PAL.
MULTI (Factory default)
Select this when your TV is compatible with both the NTSC and PAL
formats.
NTSC signals are output from the video output jacks when discs
recorded in NTSC format are played, and PAL signals are output from
the video output jacks when discs recorded in PAL format are played.
e
When “VIDEO OUT” is selected: (NOTES)
PROGRESSIVE (Factory default)
Select this when using the DVD-2910/955 connected to a
progressive type TV.
INTERLACED
Select this when using the DVD-2910/955 connected to an interlace
type TV.
NOTE:
• For the component output only, it is possible to switch between
interlace image output and progressive image output. It is not
possible to specify progressive image output for the Video output
connector or S-Video output connector.
r
When “PROGRESSIVE MODE” is selected:
AUTO 1 (Factory default)
Select this when the image recorded to the DVD is film material.
AUTO 2
Select this when the image recorded to the DVD is 30-frame film
material.
VIDEO 1 TO 3
Select this when the image recorded to the DVD is video material.
VIDEO 1
Select this for regular video material.
VIDEO 2
Select this for video material having little movement.
VIDEO 3
Select this for video material having a lot of movement.
Remote control unit Remote control unit
EXIT SETUP
PROGRESSIVE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
VIDEO OUT
NTSC
PAL
M
ULT I
SQUEEZE MODE
DECISION:ENTER BUTTON
SELECT :
EXIT SETUP
PROGRESSIVE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
VIDEO OUT
AUTO1
AUTO2
VIDEO1
VIDEO2
VIDEO3
SQUEEZE MODE
DECISION:ENTER BUTTON
SELECT :
EXIT SETUP
PROGRESSIVE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
VIDEO OUT
OFF
ON
SQUEEZE MODE
DECISION:ENTER BUTTONSELECT :
EXIT SETUP
PROGRESSIVE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
VIDEO OUT
PROGRESSIVE
INTERLACED
SQUEEZE MODE
DECISION:ENTER BUTTON
SELECT :
t
When “SQUEEZE MODE” is selected:
OFF (Factory default)
Select this to display without changing the screen size.
ON
Select this when playing back a 4:3 image that you wish
to display at 4:3 aspect ratio at the center of a 16:9 TV.
✽
Only effective for set to “WIDE (16:9)” at “TV ASPECT”.
(See page 32.)
✽
No effective for interlaced image.
✽
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”,
then press the ENTER button. It is also possible
to quit by pressing the SETUP button on the
remote control unit.
TV
TV