43
ENGLISH
NOTES:
• An English caption decoder is required to display English captions.
• DVDs with caption signals are indicated by the , , mark.
English captions cannot be displayed when playing DVDs which do not contain caption signals.
• The characters in which the captions are displayed (capital letters, small letters, italics, etc.) depend on the DVD and cannot be
selected with the DVD-2910/955.
9
USING THE PURE DIRECT MODE
2 In the pure direct mode, only analog audio signals (no video signals,
etc.) are output, thereby achieving high quality sound.
1
2
3
Press the PURE DIRECT MEMORY button on the remote
control unit.
• The output status of the video signals, etc., can be
stored at MODE 1 and MODE 2 as desired.
Use the • and ª cursor buttons to select the mode, then
press the ENTER button.
DIGITAL OUTPUT
ON: Digital audio signals are output.
OFF: Digital audio signals are not output.
VIDEO OUT
ON: Video signals are output.
OFF: Video signals are not output.
DISPLAY
ON: It is indicate in Display of the main unit.
OFF: It is not indicate in Display of the main unit.
✽
When the video output is set to “OFF” or “ALL OFF”,
neither HDMI video nor audio signals are output.
Also, when the “HDMI AUDIO SETUP” is set to
“MULTI (NORMAL)”, the digital output setting
cannot be made. (See page 30.)
Remote control unit
Remote control unit