Dish Network 32.0 Universal Remote User Manual


 
3
(or TV/VCR), follow the instructions to program the remote to operate
the TV using its code, and then repeat those instructions for the DVD/
BD player or VCR in AUX mode using its code. Press the TV mode
button to use the combination device’s TV functions, or the AUX mode
button to use DVD/BD (or VCR) functions.
SETTING UP THE REMOTE TO WORK WITH YOUR
E
QUIPMENT
You can set up the remote control to operate other equipment using the
following steps and the modes as shown on page 1.
Instructions Additional Information
1 Turn your equipment on. Use your equipment’s front
panel buttons or its own
original remote control.
2 Press POWER on your
ViP922 DVR front panel or
linked remote and access
Remote Control settings.
Press MENU and select the
Settings tile. Then from the
Settings screen, select Remote
Control.
3 Select the TV Code, DVD
Code, or AUX Code
option, as applicable. You
can also change which
device controls volume and
mute functions. Switching
Between TV and Amplifier
Volume Control on page 8
Select TV Code to program the
remote to control your TV
when in TV mode. Select DVD
Code to program the remote to
control a disc player, or select
AUX Code to program the
remote to control another audio
device when in AUX mode.
4 If you know the brand
name of your device, but
not its code, then select the
Look Up Code option
and continue with step 5.
If you know the four-digit
code for your device, select
the Enter Code option
and follow the steps for
Entering Equipment Codes
on page 5.
Your ViP922 DVR receiver’s
software maintains a database
of device codes for controlling
many types and brands of
equipment. Updates to the
software may add more device
codes to this database. Note that
the three-digit device codes
used by other DISH Network
remote controls cannot be used.