Filter
Top Products
6
2 Turn on your ViP922 DVR
and access Remote Control
settings using a linked
remote.
Press MENU, select the
Settings tile. Then from the
Settings screen, select Remote
Control.
3 Select the TV Code, DVD
Code, or AUX Code
option on the Remote
Control settings screen.
Select TV Code in order to
program the remote to control
your TV when in TV mode.
Select AUX Code to program
the remote to control an
auxiliary device, such as an
audio amplifier or DVD player,
when in AUX mode.
4 For programming in AUX
mode only: Scroll the Aux
Device: list to select and
highlight your equipment
type. Then select Next.
The remote’s AUX mode can
be programmed to control any
one of several different types of
equipment, including an audio
amplifier or receiver, DVD/BD
player, or even a second TV.
5 Select the Enter Code
option.
Select this option if you know
your device’s four-digit code. If
you do not know the code, use
the Look Up option instead, as
described in Setting Up the
Remote to Work With Your
Equipment on page 3.
6 Use the on-screen keypad to
enter the four-digit code for
your equipment. Then select
Continue.
If the device code you entered
is not in the equipment
database, a message will be
displayed. Check that you
entered your device code
correctly, and if not, try again.
7 Back on the Remote Control
settings screen, confirm that
the four-digit code you
entered appears for the
programmed device (TV,
DVD, or AUX).
For most four-digit codes you
entered manually, the device’s
brand name (in parentheses) is
displayed as unknown. See
Setting Up for Other Equipment
on page 2.
Instructions Additional Information