Filter
Top Products
C-3
Quick Setup
Confirm that your remote operates your
receiver by pressing remote buttons.
If this is not working, repeat step
5.
If the remote is still not linked to your
ViP922 receiver, see page 10 in this guide.
Making the Remote Work
With Your Receiver
3
6
Turn your ViP922 receiver
and TV on, and select
SYSTEM INFO on the
receiver front panel.
Confirm that you
see the System
Information screen.
Press and release SAT on
your remote. After a few
seconds, you will hear a tone,
and the remote will be listed
on the screen.
3
2
1
5
4
Verify this key is
installed,
and continue
with step 2.
Verify the
remote antenna
is installed on
the back of
the receiver.
REMOTE
ANTENNA