Filter
Top Products
8
SWITCHING BETWEEN TV AND AMPLIFIER VOLUME
C
ONTROL
If a remote control used with the ViP922 DVR has been set up to
operate a TV, then MUTE and VOLUME +/- buttons adjust the TV’s
volume. To use the remote to adjust the volume of your remote-
controllable audio
equipment instead of adjusting your TV’s volume,
use the steps in the left column of the following table. To switch back
to controlling the TV’s volume, use the steps in the right column.
Control Audio Amplifier Volume Control TV Volume
1 Press MENU, select the
Settings tile, and then
select Remote Control.
1 Press MENU, select the
Settings tile, and then
select Remote Control.
2 Select Volume. 2 Select Volume.
3 Under Control Volume For:
use the down arrow key to
highlight the AUX option.
3 Under Control Volume For:
use the up arrow key to
highlight the TV option.
4 Highlight and select the on-
screen option to Save this
setting.
4 Highlight and select the on-
screen option to Save this
setting.
M
AKE SURE THE REMOTE
CONTROLS THE AMPLIFIER’S
VOLUME IN OTHER MODES:
M
AKE SURE THE REMOTE
CONTROLS THE TV’S VOLUME
IN OTHER MODES:
5 Press the SAT mode
button.
5 Press the SAT mode
button.
6 Press the plus (+) and
minus (-) sides of the
VOLUME button.
6 Press the plus (+) and
minus (-) sides of the
VOLUME button.
7 Your amplifier’s volume
changes and the AUX mode
button lights instead of the
TV mode button.
7 Your TV’s volume changes
and the TV mode button
lights instead of the AUX
mode button.