Filter
Top Products
- 44 -
Notes:
• If the power is interrupted for more than 5 seconds, the channel memory may be erased. If this happens, reset the
channels again and reset AIR/CATV selection.
• If a button is not pressed within 3 minutes during the setting procedure, the screen will return to normal.
Adding Channel Memory/Erasing Channel Memory
Use this function to manually add or erase channels to/from the memory.
1. Select the channel to be added with the numbered buttons and the channel to be erased with the CH+, CH- or
numbered buttons.
2. Press the MENU button. Select “CHANNEL PRESET” with cursor or button and press the ENTER button.
SELECT :
ENTER : SET
MENU
TIMER
CLOCK
SET UP
LANGUAGE
CHANNEL PRESET
EXIT : MENU
S
MENU
CHANNEL PRESET
AIR / CATV CATV
CH SET AUTO
AIR
MANUAL
ERASE 03
[ERASE]
CHANNEL SELECT
ADD / ERASE
:
:
ADD 03
[ADD]
EXIT : MENU
/
MENU
Normal
Screen
VCR Setup
ENTER
ENTER
3. Select “CH SET” with cursor or button and then select “MANUAL” with cursor or button. Then press the
ENTER button.
4. Select “ADD” if you want to add the channel memory or “ERASE” if you want to erase the channel memory with
cursor
or button.
5. Press the MENU button to return to the normal screen.
(continue on next page)(continue on next page)
(continue on next page)(continue on next page)
(continue on next page)