Filter
Top Products
- 55 -
VCR Recording
(continued on next page)(continued on next page)
(continued on next page)(continued on next page)
(continued on next page)
Recording with the Timer
Preparation
• Turn on the TV and select the video channel.
• Insert a cassette with the erasure protection tab opening covered. Power will turn on automatically (POWER ON
indicator will light up).
• Press the TV/VCR button to select “VCR” (TAPE IN indicator will light up).
• Check that the clock is displaying the correct time.
• If necessary, set “SAP” on the ENTER button selection screen. (See Mode Selection.)
Procedures
Example:
Recording a TV programme in the SP mode: the TV programme is on channel 7 starting at 9:05 PM and stopping at
10:35 PM on August 10th. The present time is 6:35 PM on February 18th.
1. Press the MEMORY button. The Timer screen will appear and then press
the ENTER button.
2. Select the desired month/day (DATE) with the cursor
or button and
then the press the
button. The cursor will move to the next column.
EX: February 18th
• If you want to record every day or week at the same time, hold the cursor
button when you select the date.
When pressing: The recording date changes in this sequence:
8/10 MO-FR MO-SA DAILY SAT…SUN 8/9 8/8…
(next year)
8/10 8/11 8/12…….8/8 8/9 SUN…..SAT…..
(present)(tomorrow) (next year)
3. Select the desired channel with the cursor or button and then
press the
button.
EX: Channel 07
4. Set the recording start time (hour digits and minute digits) with the
cursor
or button and then press the cursor button.
EX.: 9:05 PM
Press the AM/PM button to select AM or PM.
5. Set the recording stop time with the cursor or button and then
press the cursor
button.
EX.: 10:35 PM
6. Select the tape speed with the cursor or button.
EX.: SP