Filter
Top Products
- 6 -
1) POWER/ STANDBY button
Turn the power on or off.
2) STOP button (for VCR)
Stop playing a tape.
3) PLAY button (for VCR)
Press to start or resume playback
4) CHANNEL button UP/ DOWN (for VCR)
Use to highlight selections on a menu screen and
adjust certain setting.
5) Video cassette compartment
Open tray by pushing TAPE EJECT button.
6) Disc tray
Open or close tray by pushing DVD OPEN/CLOSE
button. Place a disc on the disc tray, label side up.
7) DVD OPEN/CLOSE button
Use to open and close the disc tray.
8) VOLUME control
Change the loudness of the sound from the speakers
connected to the unit.
9) Display window
Display system information.
10) FUNCTION button (DVD/RADIO/VCR)
Select the source.
11)
PLAY button (for DVD)
Press to start or resume playback
12)
PAUSE/ STOP/REW/F.FW button (for DVD)
Press to pause playback. Each time you press the
PAUSE button the picture advances one frame.
Press the PLAY button to resume playback.
Stop playing a disc.
Fast reverse and forward playback.
13) POWER ON/ STANDBY indicator
When the Unit is turned on by pressing the POWER
ON/STANDBY button, the light will illuminate a few
Front Panel
seconds. If you press the POWER button on the
remote control, the Unit will turn off and go into
standby mode. The light will continue to illuminate.
14) VCR POWER/TIMER/VCR/REC indicator
VCR POWER : This indicator lights up whenever the
VCR is turned on.
TIMER : This indciator lights up when the VCR is set
for timer recording. Simple Recording Timer and
Recording with the Timer.
VCR : This indicator lights up when selecting "VCR"
by using TV/VCR.
REC : This indicator lights up during recording and
flashes during REC-Pause.
15) SET/MENU/REW/F.FWD button (for VCR)
SET : Confirm selections on a VCR menu screen.
MENU : Use to select various screen functions.
REW : Fast reverse playback.
F.FWD : Fast forward playback.
16) REC button (for VCR)
Record a programme from TV or other sources
(except DVD).
17) VCR ON/OFF button
Turn the VCR on or off.
18) TAPE EJECT button (for VCR)
Use to eject the tape.
19) Remote sensor
Accept the remote control unit signals.
20) VIDEO IN/AUDIO IN (L/R) jacks (AV 2 IN)
VIDEO IN : Connect a cable coming from the video
out jack of a camcorder, another VCR, or an audio
visual source here.
AUDIO IN (L/R) : Connect audio cables coming from
the audio out jacks of a camcorder, another VCR, or
an audio source here.
Parts and Functions
Note:
Screen saver - If no button is pressed within 2 minutes, the screen save function will activate for DVD only, If you want
to return to the normal screen, press any button.
(Continued on next page)(Continued on next page)
(Continued on next page)(Continued on next page)
(Continued on next page)
1234 5 6
7
8
9101112131516 14
1718
19
20