Filter
Top Products
Timer
The built in timer can administrate up to 12 recordings. Thereby you can choose a fixed
recording date or day of the week for each timer command.
The recordings are programmed in the menu point “Timer” in the main menu. All dates to
the 12 entries can be seen in the overview. The individual entries can be processed using
the OK button. Setting whether a timer should be programmed for a fixed date or a regular
day of the week is done by pressing the LIST button in the date column. If an end time
which is sooner or the same as the start time is entered, the recording will take place on
the following day.
In order for the timer to function properly the internal clock must be correct. This can be
checked by looking at the time in the status panel.
The TIMER LED is illuminated permanently when at least one timer is programmed. During
recording the TIMER LED blinks on and off every half a second. If a timer has been pro-
grammed and the receiver has not received correct time information from the TV signal the
TIMER LED blinks quickly to warn you.
Programming transmissions from the EPG
A program can be copied from the daily overview and its detailed view directly into a free
timer by pressing LIST.
PVR-X10 15