Filter
Top Products
Basic Settings
After switching on your PVR-X10 for the first time, or after using the factory defaults func-
tion you will be asked to choose your OSD language and your geographical location, the
PVR will also offer you the choice to perform a channel search, which takes a few min-
utes, when all channels are scanned the first received channel will appear.
Press the list button to view all the channels available.
1. Open the main menu
2. Go to Edit Settings
3. Go to “Signal output” if you wish to control the volume via the PVR set the volume
bypass to OFF
4. If you wish to control the volume of the TV signal by an Amplifier or TV, set the
volume level of the connected device to the minimum then select bypass to ON.
5. Leave the “Signal Output” menu by pressing EXIT and move to the heading “Save
Settings” Press OK and wait until the menu disappears.
8 PVR-X10