Filter
Top Products
Use of the RX/TX port
The serial port of the receiver offers you the possibility of connecting to a PC for software/
firmware updates. Such updates may be downloaded from our website at
www.wintal.com.au.
Updates and firmware revisions will be announced on the Wintal web site as they become
available.
For connection to a PC a serial cable is required with 1:1 pin configuration. The cable
requires a 9- or 25-pin D-SUB socket on the PC end, depending on the serial port of your
PC. At the receiver end a 9-pin D-SUB connector is required.
Configuration of the cable is as follows:
1, 4, 6 – 9 not connected
2 TXD
3 RXD
5 GND
24 PVR-X10