Dynex DX-32L130A10 Flat Panel Television User Manual


 
16
Adjusting the soundDX-32L130A10
Contrast–Lets you increase or decrease the
contrast of the picture. Increase the contrast to
adjust the white areas of the picture or decrease
the contrast to adjust the black areas of the
picture.
Saturation–Lets you adjust the intensity of the
colors.
Hue–Lets you adjust the overall color of the
picture.
Sharpness –Lets you increase the sharpness
level for clearer images or decrease the
sharpness level for smoother images.
Color temperature–Lets you change the color
temperature. You can select the color
temperature from three options: Cool,
Standard, or Warm.
Advanced Video–Lets you access and adjust
advanced video settings,such as DNR,Black
Level Extender, White Peak Limiter, Flesh
Tone, Adaptive Luma Control and Overscan
(only in HDMI).
Choosing the display format
To choose the display format:
•Press ZOOM repeatedly to cycle through the
available display formats. Options include:
Normal–Picture is displayed in a 4:3 aspect
ratio.
Zoom–Picture is displayed to cover the
entire screen.
Wide–Picture uses a widescreen aspect
ratio.
Cinema–Picture is displayed in a 21:9 aspect
ratio.
Adjusting the sound
To adjust the sound:
1 Press MENU. The Main menu opens.
2 Press or to highlight Audio, then press
ENTER or . The Audio menu opens.
3 Press or to highlight an option, then press
or to adjust the option. You can adjust:
Balance–Lets you adjust the volume of the left
and right speakers.
Sound Surround–Lets you turn the surround
sound effect on or off.
Equalizer–Lets you select the frequency you
want to adjust and change its value.
Auto Volume Control–Lets you turn automatic
volume control on or off. The option keeps the
audio in a preset range to eliminate large spikes
in volume.
SPDIF Type–Lets you select the SPDIF type. You
can select PCM, Dolby Digital, or Off.
Note: By selecting SPDIF Type, you can choose the digital
audio out type. If Audio Volume Control is On, that
means audio out control is activated.
Selecting the audio mode
To select the audio mode:
•Press AUDIO to select sound mode. Options
include Standard, Speech, User, and Music.
Changing channel settings
To change the channel settings:
1 Press MENU. The Main menu opens.
2 Press or to highlight TV, then press ENTER
or . The TV menu opens.
3 Press or to highlight an option, then press
or to adjust the option. You can select:
Tuner Mode–Lets you select Antenna or
Cable.
Channel Scan–Lets you scan for channels that
have signals and stores the channels
information in memory. When you press CH+ or
CH-, your TV skips any channels that do not
have a signal.
Channel Skip–Lets you delete a channel stored
in memory. When you press CH+ or CH-, your
TV skips the channel you deleted. You can still
tune to the channel using the number buttons
on the remote control.
MTS–Lets you select the sound mode. You can
select Mono, Stereo, or SAP (second audio
program).
Audio Language–Lets you select the audio
language for a program (if other languages are
available).
DX-L32L130A10_09-0617_MAN_ENG_V1.book Page 16 Thursday, July 30, 2009 2:41 PM