Dynex DX-32L151A11 Flat Panel Television User Manual


 
16
Adjusting the soundDX-32L151A11/DX-37L130A11
2 Press or to highlight Audio, then press . The Audio menu
opens.
3 Press or to highlight an option, then press or to adjust
the option. You can select:
Sound Mode—Selects the sound mode. You can select:
Standard (for normal programs)
News (for news programs)
Music (for musical programs)
Movie (for movies)
Custom (for a customized sound mode).
Note: You can also press AUDIO one or more times to select the
sound mode.
Bass—Adjusts the low sounds.
Treble—Adjusts the high sounds.
Balance—Adjusts the balance between the left and right
audio channels.
Surround—Turns the surround sound effect on or off.
AVC—(Auto volume control) Equalizes the overall volume
levels for all channels.
Digital Output—(digital channels only) Selects the digital
audio output mode. You can select RAW (outputs audio in its
original format) or PCM (outputs the audio in PCM mode, if
available).
Audio Language—(digital channels only) Selects an
alternate audio language, if available.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Selecting the audio mode
You can select the audio mode for analog channels.
To select the audio mode for analog channels:
Press MTS/SAP on the remote one or more times. You can select:
MONO—Select this option if there is noise or static on weak
stereo broadcasts.
STEREO—Select this option for programs broadcast in
stereo.
SAP—Select this option to listen to a secondary audio
program, if available.
Note: Mono is automatically selected if the program is broadcast in
mono.
To select an audio track for a digital channel:
Press MTS/SAP. The audio track plays if one is available.
Playing TV audio only
You can turn off the picture on your TV and listen to only the program
audio.
To play only the TV audio:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Setup, then press . The Setup menu
opens.
3 Press or to highlight Audio Only, then press or to
select On.
4 Press EXIT to close the menu. After pressing EXIT, the picture will
turn off in approximately 5 to 10 seconds.
Notes:
Audio Only works only when the input source is TV and your TV is receiving
a broadcast signal.
To exit Audio Only mode, press any button. When you exit Audio Only
mode, the Audio Only option is automatically reset to Off.
Picture
MENU
Exit
Sound Mode
Bass
Treble
Balance
Surround
Digital Output
Audio Language
Setup Channel
Custom
57
50
0
AVC
Audio
O
English
RA W
O
Select
Move
Picture
Select
Move
MENU
Exit
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Setup Channel
Custom
70
40
60
0
Sharpness
50
Backlight
30
MENU
Exit
Time
Closed Caption
Menu Settings
Input Label
Restore Default
Audio Channel
Parental Controls
SetupPicture
Select
Move
VGA Settings
Audio Only
On
DX-32L151A11-37L130A11_10-0567.book Page 16 Tuesday, June 1, 2010 9:26 AM