Dynex DX-32L200A12 Home Theater Screen User Manual


 
Making connections
9
DX-32L200A12/DX-37L200A12/DX-46L262A12
Using DVI (same as HDMI but requires an audio
connection)
To connect a cable or satellite box using DVI:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect it
to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the HDMI cable to the
HDMI1 or HDMI 2 jack on the side of your TV.
5 Connect a 3.5 mm audio cable (not provided) to the
L and R AUDIO jacks on the side of your TV and to
the AUDIO OUT jack on the cable or satellite box.
6 Turn on your TV, then turn on the cable or satellite
box.
7 Go through the setup wizard on page 15.
Using component video (better)
To connect a cable or satellite box using component
video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to
the COMPONENT IN/Y, PB, PR jacks on the side of
your TV and to the component video out jacks on
the cable or satellite box.
4 Connect an audio cable (not provided) to the L, R
audio jacks on the side of your TV and to the audio
out jack on the cable or satellite TV box.
5 Turn on your TV, then turn on the cable or satellite
box.
6 Go through the setup wizard on page 15.
HDMI cable with HDMI-DVI adapter
3.5 mm audio cable
Cable or satellite box
Side of TV
Side of TV
Component video cable
Audio cable
Cable or satellite box
DX-32L-37L-46L_11-1082_MAN_V2_EN.book Page 9 Tuesday, November 22, 2011 1:09 PM