Dynex DX-32L200A12 Home Theater Screen User Manual


 
18
Adjusting the pictureDX-32L200A12/DX-37L200A12/DX-46L262A12
Navigating the menus
Selecting a channel
To select a channel:
•Press CH+ or CH– to go to the next or previous
channel on the memorized channel list.
Press the number buttons to enter the channel
number you want, then wait for the channel to
change or press ENTER to immediately change the
channel.
To select a digital sub-channel, press the number
buttons to select the main digital channel, press
.
(dot), then press the number button for the
sub-channel. Wait for the channel to change, or
press ENTER to immediately change the channel.
•Press RECALL to go to the last viewed channel. Press
RECALL again to return to the channel you were
watching.
•Press CH-LIST to open the channel list, press
or
to highlight a channel, then press ENTER. Hidden
channels are grayed out on the Channel list.
•Press FAVORITE to open the favorite channel list,
press
or to highlight a channel, then press
ENTER.
Adjusting the volume
To adjust the volume:
•Press VOL+ or VOL– to increase or decrease the
volume.
•Press MUTE to turn off the sound. Press MUTE
again to turn the sound back on.
Viewing program information
To view channel information:
Press INFO to view an information banner. The
information banner shows the current program
information such as channel number, video input
source, and resolution.
Digital channel information—Displays the
channel number, station name, channel label,
broadcast program name, TV rating, signal type,
audio information, resolution, CC mode, current
time, and current program start and end times.
Analog channel information—Displays channel
number, channel label (if preset), signal type,
audio information, and resolution.
Press GUIDE to show the digital program guide,
which may present a list of available programs,
program times, and program summaries, depending
on the information provided by the broadcaster.
Adjusting the picture
Adjusting the TV picture
To adjust the TV picture:
1 Press MENU. The on-screen menu opens with the
Picture menu displayed.
2 Press to access the menu.
3 Press or to highlight an option, press or to
adjust the setting, or press
or ENTER to the
sub-menu. You can select:
Picture Mode—Selects the picture mode. You
can select:
Vivid—Provides a bright and vivid picture.
Standard—Provides a standard picture.
Energy Saving—Reduces the brightness and
backlight levels to save energy.
Custom—Lets you manually customize the
picture settings.
Contrast—Adjusts the brightness of the light
areas of the picture.
Brightness—Adjusts the brightness of the dark
areas of the picture.
Color—Adjusts the color intensity of the picture.
A low setting may make the color look faded. A
high setting may make the color look artificial.
Tint—Adjusts the color balance of the picture.
Use this control to make skin tones look more
natural.
Note
If a list has more than one page, press or to scroll
through the pages.
MMEENNUU
MMEENNUU
EEXXIITT
Press MENU to open the on-screen menu.
Press
or to select menu options.
Press ENTER to confirm a selection or
enter a sub-menu.
Press MENU to return to the previous menu.
Press EXIT to close the menu.
Press
or to move the cursor on the
screen or to adjust a selected item.
Note
You can also press PICTURE to select the picture
mode.
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Custom
70
40
60
0
Sharpness
50
Backlight
30
Reset Picture Settings
Select
Move
EXIT
Exit
MENU
Back
Adjust settings to affect picture quality.
DX-32L-37L-46L_11-1082_MAN_V2_EN.book Page 18 Tuesday, November 22, 2011 1:09 PM