Dynex DX-32L200A12 Home Theater Screen User Manual


 
4
Installing the stand or wall-mount bracketDX-32L200A12/DX-37L200A12/DX-46L262A12
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damage and scratches.
2 Align the screw holes on the stand with the holes on
the bottom edge of the TV, then secure the stand
with the screws provided (three M5 x 8 mm screws
for the 32” TV, and four M5 x 8 mm screws for the 37”
and 46” TVs).
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damage and scratches.
2 Remove the screws that secure the stand to the
stand column, then remove the stand.
3 Remove the screws that secure the stand column to
your TV, then remove the stand column.
4 Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
DX-32L200A12 (32-inch TV) and
DX-37L200A12 (37-inch TV)
DX-46L262A12 (46-inch TV)
Note
The appearance of the product in this User Guide
may differ from your actual product, and is for
explanatory purposes only.
Notes
If you plan to wall-mount your TV, do not install
the stand.
Store the stand and stand screws in case you
decide to use the stand in the future.
Note
You must pay attention to the direction of the stand.
The wide portion of the stand should go towards the
front of the TV.
Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
Locators
Locating grooves
Stand
M5 screws
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
Remove the screws
Stand
Stand column
7.84 in. (200 mm)
7.84 in. (200 mm)
Wall mount brackets
23.62 in. (600 mm)
7.84 in. (200 mm)
Wall mount brackets
DX-32L-37L-46L_11-1082_MAN_V2_EN.book Page 4 Tuesday, November 22, 2011 1:09 PM