Filter
Top Products
Setting parental controls
19
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub menu
opens.
5 Press or to highlight System Lock, then press or to
select On (to enable the blocking scheme you set up and to set
up the blocking scheme (otherwise the rating setting can not be
accessed) or Off (to disable the blocking scheme you set up).
6 Press EXIT to close the menu.
Setting or changing the password
To set the parental password:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Setup, then press . The Setup menu
opens with Parental Controls selected.
3 Press ENTER. The Enter Password screen opens.
4 Press the number buttons to enter the four-digit password. The
default password is 0000. You should change the password to a
number you can remember. The Parental Controls sub-menu
opens.
5 Press or to highlight Change Password, then press
ENTER. The password entry screen opens.
6 Press the number buttons to input old password, then input a
new password, and then confirm the new password again. The
Parental Controls sub menu reopens.
Note: If you forget your password, enter 9999.
7 Press EXIT to close the menu.
Parental Controls
DX-L15-L19-L22-10A_08-1840.book Page 19 Saturday, January 24, 2009 7:40 AM