Filter
Top Products
14
Using your TV
3 Press or to select an option, then press or to adjust the
option. You can adjust:
• Sound Mode—Selects Standard, Music, Movie, or
Personal.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• Balance–Adjusts the balance between the left and right
audio.
• Surround—Turns the surround sound effect on or off.
• AVC—Turns auto volume control on or off. When AVC is on,
the overall volume levels are equalized across all channels.
• SPDIF Type—(Digital programs only) Selects the audio
output mode. RAW outputs the audio in its original format.
PCM outputs the audio in PCM format (if available).
• Audio Language—(Digital programs only) Selects an
alternate audio language if the program has more than one
language.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu system.
Note: You can also press AUDIO to select the Sound Mode.
Selecting the audio signal type
For analog programs, your TV can receive MTS stereo programs and any
SAP (secondary audio program) that comes with a stereo program.
To select the audio signal type:
•Press MTS/SAP one or more times. You can select:
• MONO—Sends the same signal to the left and right audio. If
you are having trouble hearing a stereo broadcast, select this
option.
• STEREO—Sends different signals to the left and right audio.
• SAP—Plays a secondary audio program, if available.
Note: If you are watching a digital program, pressing MTS/SAP selects an
audio track, if available.
Setting the clock
The time is set automatically from a digital channel signal. You can
select a time zone and turn daylight saving on or off.
To set the clock:
1 Press MENU. The on-screen menu opens.
2 Press or to select Time, then press to open the Time
menu.
3 Press or to select Time Zone, then press or to select a
time zone. You can select Pacific, Alaska, Hawaii, Eastern,
Central, or Mountain.
4 If your viewing area observes daylight saving time, press or
to select Daylight Saving Time, then press or to select
On.
The current date and time appear at the bottom of the option list.
Displaying the information banner
The information banner displays current status information, such as the
channel number or signal source. In DTV mode, you may also see
additional information.
To display the information banner:
• Press DISPLAY. The information banner opens.
Displaying the program guide
If available, the program guide displays program information, such as
the viewing time, program name, and program description.
To display the program guide:
• Press GUIDE. The program guide opens.
Monitoring the DTV signal strength
You can check the DTV signal strength. The stronger the signal, the less
likely you are to experience picture degradation. If the signal is weak,
you may need to adjust your antenna or digital cable input.
To monitor the DTV signal strength:
1 Press MENU. The on-screen menu opens.
2 Press or to select Channel, then press to open the
Channel menu. The DTV Signal bar appears at the bottom of the
menu.
Setting up the favorite channel list
To set up the favorite channel list:
1 Press MENU. The on-screen menu opens.
2 Press or to select Channel, then press to open the
Channel menu.
Sleep Timer
Time Zone
Daylight Saving Time
Clock
Picture Sound Time Setup Lock Channel
Off
Select Move
MENU
Exit
Hawaii
Off
2008/01/15 06:58AM
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
Picture Sound Time Setup Lock Channel
Good
Select Move
MENU
Exit
WGBH-SD
2-1
:
Air/Cable
Air
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
Picture Sound Time Setup Lock Channel
Good
Select Move
MENU
Exit
WGBH-SD
2-1
:
Air/Cable
Air