Filter
Top Products
MENU EXIT
To close the MENU display, press the POINT RIGHT BUTTON to select right end ICON and then press the SELECT (REAR
CLICK) BUTTON.
NOTE: Press the MENU BUTTON during the appearing of the MENU display on the screen, the MENU display is disappeared.
COLOR SYSTEM SELECT (VIDEO MODE)
This projector is compatible with the six major broadcast video standards: PAL, SECAM, NTSC, NTSC 4.43, PAL-M or PAL-N
(COLOR SYSTEMs). When the color system is set to “Auto” position, this projector can receive color programs from one of the
4 systems (PAL, SECAM, NTSC or NTSC
4.43),
automatically.
However, if the video
signal is poor, the projector may not
reproduce the proper video image. In this case, a specific broadcast format should be choosen by color system select.
1. Connect the video equipment and the PROJECTOR, and turn them on.
2. Set MODE SELECT to “VIDEO MODE”.
3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
4. Press the POINT LEFT/RIGHT BUTTON(s) to select SYSTEM and
press
the SELECT (REAR CLICK) BUTTON.
Another dialog box COLOR SYSTEM DISPLAY will appear. The current COLOR SYSTEM is displayed in the system
window.
5. Press the POINT DOWN BUTTON and a red arrow will appear.
6. If you want to change the COLOR SYSTEM from the current one, move the arrow by press the POINT UP/DOWN
BUTTON(s) to the system that you want to select and then press the SELECT (REAR CLICK) BUTTON and changed the
color mode.
7. The setting changed is temporarily effective until you turn off the MAIN ON/OFF switch.